Flexible cable chain for sliding doors
Smart and elegant solution for sliding doors when power is required on the movable door itself.
For example to a door interlock switch. Especially designed for double sliding doors locked in the centre, with or without an overhead rail, where a fixed post to attach a cabling is missing. A number of kits have been created depending on the system height, type of door and requested size of the opening. See list of all combinations and article no.
Available for every height (not 1400 mm). The limit of the cable diameter is set to 8 mm.
Note, in case of no continuing panel next to the door, the kit cause a reduction of the max. door opening, at least 182 mm.
Models
Models
Downloads
Product Information
The X-Guard sliding door cable kit is an elegant and practical solution for supplying power to movable doors, particularly when an interlock switch or other electrical components are needed. Specifically designed for double sliding doors with center lock, it works seamlessly with or without an overhead rail—ideal in situations where a fixed post for cabling is unavailable.
A range of kits is available, tailored to system height, door type, and required opening size. This ensures compatibility with various X-Guard machine guarding configurations, providing a flexible and reliable industrial safety solution. The kit supports all heights except 1400 mm, with a maximum cable diameter of 8 mm.
Important: If no continuous panel is present next to the door, the kit reduces the maximum door opening by at least 182 mm.
For a full list of compatible configurations and article numbers, refer to the product documentation.